TECHNOLOGY EXPERT
Minimise waste and maximise
your profits with BlakerTech
Products reliably recover high volumes of non-ferrous metals from dry recyclables.
BlakerTech designs and manufactures equipment for the metal recy-
cling industry. Its products have been tried and tested worldwide,
help reduce landfill waste and save on the rising costs associated
with waste disposal. The two leading systems are the MagThro eddy
current system and SandFlo fluidised bed separator. Both are easy to
use, reliable and robust.
MAGTHRO(TM)
MagThro is a high-energy magnetic recycling system made from top
quality components that remove non-ferrous metals from mixed
materials in one step using a dry process.
• Made from high-grade components
• Fitted with 12 pole magnet shafts
• Neodymium rare earth magnets generate a strong magnetic force
to efficiently separate non-ferrous metals from other non-ferrous
mixed materials
• A fully adjustable eccentric rotor maximises the magnetic force and
increases recovery rates
• Options of a two or three-way splitter to suit client requirements
• A robust framework allows walkways to be attached and hinged
panels enable quick access for routine maintenance
• A range of belt widths: 500, 750, 1 000 and 1 250mm
• The main belt is fully adjustable and can be replaced without dis-
turbing the ECS rotor
• A full stock of accessories: rotors, drums, hoppers, shakers, split-
ters, conveyors, drum magnets and eddy currents
• An environmentally friendly, dry process with no contaminated
effluent to treat
SANDFLO(TM)
SandFlo uses aerated sand to efficiently sort secondary metals and
minerals according to their density. SandFlo is ideal for the recovery
of aluminium, zinc, copper and brass fractions from mixed non-fer-
rous metals in processing plants.
A standard SandFlo system was sold recently to a client in Dubai who
owns and operates a large metal recycling company. Its objective was
to separate aluminium and magnesium fragments from mixed shred-
der residue to produce clean aluminium and magnesium fractions for
re-sale. Since its installation, the client has been impressed with
SandFlo’s performance, reporting nil heavies in the light fraction out-
put. It says it will achieve a return on investment within nine months.
• A cost-effective system with high recovery performance
• The carbon footprint is less than 25% of an optical sorter
• An environmentally friendly, dry process with no contaminated
effluent to treat
• A proven commercial solution for upgrading non-ferrous fragment-
ed scrap
• The sand can be cleaned and reused
• Requires a single operator and can recover 2-2.5 tonnes of material
per hour
• By saving costs on manual pickers, SandFlo typically pays for itself
within 12 months or less
MagThro and SandFlo are individually built at our manufacturing
facility in south-east England. Blaker also provides full installation,
training and support.
It keeps a wide range of accessories in stock including replacement
rotors, hoppers, drum magnets, splitters, conveyors and much
more.
For further information or to arrange a demonstration, contact
the team:
T: 01403 783634, E: [email protected]
www.blakertech.com
47_blakertech.indd 47 03-05-2023 16:58
